Alert signaling, Attendant console calling, Alert signaling attendant console calling – Toshiba Starta DK Digital Telephone User Manual
Page 31
 
Features
Alert Signaling
Strata DK Digital Telephone
5/99
19
Alert Signaling
Alert Signaling enables you to send an alert sound to a predesignated (partner) station by 
pressing a single button. This feature is based on the “buzz” key, where, for example, a 
manager might alert his/her administrative assistant to enter the office.
You can have as many as four
$OHUW 6LJQDO
(s) to send or receive an Alert Signal to/from
other telephones. An Alert Signal is sent even if the alerted telephone is busy (on/off-hook) or 
in the DND or Call Forward mode.
➤
To send an Alert Signal
➤
Press
$OHUW 6LJQDO
. An alert tone sounds at the designated station.
Attendant Console Calling
Up to four Attendant Consoles can be installed per system. There can be up to three ways to 
call the Attendant Console, depending upon system programming.
➤
To call any attendant console
➤
To call a specific console
➤
To call all consoles for an emergency
➤
Press a [DN] +
.
The call rings the Attendant Console’s
button. Dial
calls
rotate between the consoles if more than one console is installed.
➤
Press a [DN] + the 
console’s [DN].
The call rings the console’s
,Q'1
(incoming [DN] button). Your
System Administrator can provide the Attendant Console(s)
,Q'1
s.
➤
Press a [DN] + the 
emergency access 
code 
.
The call rings the
(PJU
button on all attendant consoles.