Toshiba Starta DK Digital Telephone - Manual (Page 41)

Features
Call Forward
Strata DK Digital Telephone 5/99
29
Call Forward–Fixed
➤ Press &DOO )UZG WR . The LED lights steady red and all calls forward to a station [PDN]
or voice mail device set in system programming.
...or press &DOO )UZG WR a second time to cancel the feature.
Call Forward—External
➤
To cancel a Call Forward—External
➤ Press &DOO )UZG ([WHUQDO
...or [PDN] +  + 6SNU .
1. Store the destination
number at Station
Speed Dial location
Code 49 (RCTUA, B,
C/D processors) or
location 139
(RCTUE/F
processors).
Only perform Step 1
the first time Call
Forward-External is
set or when you
change the
destination. It is not
necessary to store the
destination each time;
it remains in system
memory.
This feature enables you to forward new incoming calls
directed to your [PDN] to a destination outside of the system.
[PhDNs] assigned to your telephone do not Call Forward to an
external destination. Internal calls and transferred calls to your
[PDN] do not forward to external destinations.
Only incoming calls over CO lines dedicated to immediately
ring on your [PDN], private CO
/LQH button, and/or Direct In
Dial line calls forward. Any of the other Call Forward modes
can be set for your [PDNs] or [PhDNs] simultaneously with
Call Forward-External.
Use the Speed Dial storage procedures detailed on See Page
60 . When forwarding to an outside destination include the CO
Line (or CO Line group) access code before the telephone
number.
Example: 8015833700
801 = CO Line access code
5833700 = Telephone number
See Table 12 on page 109 for CO Line/Line Group access
codes. The LCR access code “9” cannot be used.
2. To set CF-External,
press &DOO )UZG
([WHUQDO
...or the [PDN] +

.
Incoming calls forward to the destination stored at Station
Speed Dial Location 49.