Message waiting light on [phdn/mw – Toshiba Starta DK Digital Telephone User Manual
Page 61
 
Features
Message Waiting
Strata DK Digital Telephone
5/99
49
➤
To cancel the Msg light
Message Waiting Light on [PhDN/MW]
➤
To respond to [PhDN/MW]
➤
To cancel [PhDN/MW]
3. After receiving the
message(s), place the 
handset on hook.
If the Msg LED continues to flash, you have more messages—
repeat the Steps to retrieve them. Voice mail devices may 
cancel the indication after a short delay.
➤
Press
0VJ
and lift the
handset.
Your Msg LED turns OFF when the called party answers.
Note
The called party must answer—by either going off-
hook or by pressing 
6SNU
—for the indication to be
cancelled automatically.
Your Msg LED turns OFF without calling the telephone or VM 
device.
...or [DN] +
to
cancel the light. This 
must be done for each 
message recorded.
1. Press the flashing red
[PhDN/MW] LED.
Your phone rings the station or voice mail device that left the 
message. If the called party or VM device answers, the 
message waiting indication is cancelled automatically. If there 
is no answer, hang up and try at a later time. The red
[PhDN/MW] LED on your phone continues to flash.
2. After receiving the
message, press
6SNU
...or place the handset 
on-hook.
If you have more messages, the red [PhDN/MW] LED 
continues to flash. To answer the next message, repeat this 
procedure.
1. Press [PhDN].
You hear a steady dial tone.
2. Enter
.
The dial tone stops.
3. Press
6SNU
.
The [PhDN/MW] LED turns OFF, indicating that the message 
has been canceled.