Toshiba PROSEC T3H - Manual (Page 58)

56
PROSEC T3H
2. Expanded Functions
2.4.4 Expanded data transfer (XFER)
FUN 236 XFER Expanded data transfer
Expression
Input
─[ A XFER B →
C ] ─ Output
Function
When the input is ON, data block transfer is performed between the source which is indirectly designated by
A and A+1 and the destination which is indirectly designated by C and C+1. The transfer size (number of
words) is designated by B.
The transfer size is 1 to 256 words. (except for writing into EEPROM)
Data transfer between the following objects are available.
•
CPU register
↔
CPU register
•
CPU register
↔
Expanded F register (IC memory card)
•
CPU register
↔
TOSLINE-S20 or TOSLINE-S20LP (here called S20 or S20LP)
•
CPU register
↔
EEPROM (D register)
Execution condition
Input Operation Output ERF
OFF No execution OFF −
ON Normal execution ON −
When error is occurred (see Note) ON Set
Operand
Name Device Register Con- Index
X Y S L R Z T. C. I O X
W
Y
W
S
W
L
W
R
W
W T C D F I
W
O
W
I J K stant
A Source
parameter
√ √ √ √ √ √ √ √ √ √ √
B Transfer
size
√ √ √ √ √ √ √ √ √ √ √
C Destination
parameter
√ √ √ √ √ √ √ √ √ √
Source parameter Transfer size and status Destination parameter
A Bank / CH Type B Transfer size C Bank / CH Type
A+1 Leading address B+1 Status flag C+1 Leading address
(Scan healthy map)
B+16 Max. 16 words
•
Refer to the following table for contents of each designation.
•
The status flag is created only when the transfer from S20 to Register.