Toshiba RD-KX50SU - Manual (Page 22)

22
Connections
Incoming cable
Incoming cable
Incoming cable
Cable box
Cable box
IN OUT
IN OUT
RF IN
(FROM ANT.)
RF OUT
(TO TV)
VHF / UHF
R L VIDEO S-VIDEO
R L IR VIDEO S-VIDEO
CHANNEL
CHANGE
INPUT1 UTPUT
TPUT INPUT3
HDMI OUTPUT
RF IN
(FROM ANT.)
RF OUT
(TO TV)
VHF / UHF
R L VIDEO S-VIDEO
R L IR VIDEO S-VIDEO
CHANNEL
CHANGE
INPUT1 ONENT OUTPUT
OUTPUT INPUT3
HDMI OUTPUT
3CH
4CH
RF IN
(FROM ANT.)
RF OUT
(TO TV)
VHF / UHF
VIDEO S-VIDEO
IR VIDEO S-VIDEO
CHANNEL
CHANGE
INPUT1
INPUT3
HDMI OUTPUT
3CH
4CH
Connecting to cable TV signal
Choose one of the below according to your usage of the cable box.
For watching received channels, connect to the TV via the audio/video cable.
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (only when you connect a cable-compatible
TV).
You will need to:
• to record a channel while watching another, select a
desired channel on the TV (only when you connect a
cable-compatible TV).
This set-up will allow you to:
– record an unscrambled channel.
– record an unscrambled channel while watching
another (scrambled or unscrambled).
You will need to:
• set TV channel to the output channel of the cable box.
• to record an unscrambled channel while watching a
scrambled channel, select a desired cable channel via
the cable box.
This set-up will allow you to:
– record any channels through the cable box.
You will need to:
• set “Cable Box/DBS” of “Set Top Box setting” to
“C.Box”. page 42
• set “Select input” of “Set Top Box setting”to “3CH” or
“4CH”. page 42
• select a desired cable channel via the cable box.
• while the recorder is turned off, set TV channel to the
output channel of the cable box.
You can control cable channels from the recorder.
Perform the below.
1) Connect the supplied IR cable to the CHANNEL
CHANGE IR jack of the recorder. page 25
2) Set “IR control” of “Set Top Box setting” to “On”.
page 42
RD-XS52SU/SC_Inst_E_p19-30 04.8.31, 13:03 22