Toshiba RD-KX50SU - Manual (Page 26)

26
Connecting to a TV with the HDMI terminal
Connections
About HDMI TM
HDMI stands for High Definition Multimedia Interface. HDMI transfers digital audio and uncompressed digital video
on a single cable. As a result, audio cables and video cables don’t need to be connected separately to a device. In
addition, HDMI is compatible with HDCP (High Bandwidth Digital Content Protection).
Notes
• Refer to the owner’s manual for the TV to be connected to this recorder for more information concerning HDMI
connections.
• When the HDMI connection is not verified, the error message appears on the screen or the front panel display.
Depending on content, the message doesn’t appear on the screen with only the HDMI connection. To see the error
message, connect your TV to Video output or S-Video output.
• When the HDMI connection is not verified, content that can only be recorded one time and content that can never
be recorded cannot be played back on a HDMI-compatible TV through this recorder (content that is not copyright
protected can be played back.).
• HDMI connections with this recorder is not available with VGA output.
• Connect directly your TV with this recorder. When your TV is connected with the recorder via other device such as
an amplifier or selector, the HDMI connection may not function properly.
• HDMI is an evolving technology, so it is possible that some devices may not operate properly with this recorder.
• When the HDMI connection is used, the startup screen which is displayed on the screen when the recorder is
turned on does not appear on your TV.
RF IN
(FROM ANT.)
RF OUT
(TO TV)
VHF / UHF
R L VIDEO S-VIDEO
R L IR VIDEO S-VIDEO
CHANNEL
CHANGE
DIGITAL AUDIO
OUTPUT
BITSTREAM/PCM
OPTICAL R L VIDEO S-VIDEO
Y P B P R
INPUT1 COMPONENT OUTPUT
OUTPUT INPUT3
HDMI OUTPUT
HDMI INPUT
HDMI OUTPUT
Available output signals are
below.
• 480i (interlace)
• 480p (progressive)
• 720p (progressive)
• 1080i (interlace)
HDMI-compatible TV
HDMI cable (supplied)