Toshiba D-VR3SU - Manual (Page 11)

English - 21
C
onnections
20 - English
C
onnections
Method 2 : Connecting to a stereo
amplifier with analog input jacks
If your stereo amplifier only has audio input jacks
(L and R), use the analog audio out jacks.
Method 3 : Connecting to an AV
amplifier with the digital input jack
If your AV amplifier only has a Dolby Digital or DTS
decoder and a digital input jack, use this connection.
To enjoy Dolby Digital or DTS sound, you must set up
the audio settings. (See page 30)
Method 4 : Connecting to
Component video input
jacks(Y,C
B /T B ,C R /P B ) in 480p mode
Your TV must support progressive scan input to allow you to
watch 480p video output.
1. Connect Component video cables(not supplied) between
the COMPONENT VIDEO OUT jacks on DVD Recorder-
VCR and COMPONENT VIDEO IN jacks on the TV (or
AV amplifier).
2. Make sure that the disc has stopped completely before
changing the mode. Press the Progressive button on the
front panel. The mes-sage “Press “Yes” to confirm
Progressive scan mode. Otherwise press “No”.” will be dis-
played. If you want 480P mode, select yes. If “480P” is dis-
played on the front panel display, now your DVD
Recorder-VCR is operated on 480P Mode.
Make sure that the color coded connections match.
That is, the Y, Pb and Pr component output jacks
of your DVD Recorder-VCR should be connected
to the exact corresponding component input jacks
on your TV. Otherwise, red or blue images will be
displayed on the TV screen.
Once 480p video output mode is selected, Video,
S-Video and 480i outputs are disabled.
Make sure that the left and right audio output
jacks of your DVD Recorder-VCR are connected to
the left and right audio input jacks of your TV,
respectively.(page 21)
Note
There are several ways to connect your DVD Recorder-VCR.
Select the audio connection that best suits you below.
• Method 1 : Connecting to your TV
• Method 2 : Connecting to a stereo amplifier (analog audio
out / digital audio out)
• Method 3 : Connecting to an AV amplifier with a digital
input jack.
Step 4 : Connecting
the Audio Cable
Manufactured under license from Dolby Laboratories.
“Dolby” and the double-D symbol are trademarks of
Dolby Laboratories.
“DTS” and “DTS Digital Out” are trademarks of
Digital Theater Systems, Inc.
Method 1 : Connecting to your TV
This connection will use your TV’s speakers.