Toshiba D-VR3SU - Manual (Page 18)

English - 35
S
ystem Setup
34 - English
S
ystem Setup
DVD-VIDEO
Add/Delete Channel.
Press Enter to move the cursor to select Add, then
press
❿☎ if you want to select Delete. Press ENTER
to confirm your selection.
6
RF Output Channel
When you connect the DVD Recorder-VCR to TV with RF
Antenna Cable, follow the steps below to set the
RF output channel.
Open “MENU”
With the DVD in Stop or Play mode, press the
MENU button.
1
DVD-VIDEO
Channel Add/Delete
Use this feature if Auto Channel Search missed a
channel that you would like to add and delete a channel you
wish to remove.
Open “MENU”
With the DVD in stop mode, press the MENU
button.
1
Select “Setup”
Using the ➐❷ buttons, move the
selection bar to “Setup” then press ENTER to select.
2
DVD-VIDEO
Select “Channel Set”
Using the ➐❷ buttons, move the selection bar to
“Channel Set”, then press Enter to select.
3
Select “Channel Add/Delete”
Move the selection bar to “Channel Add/Delete,”
then press ENTER to select.
4
DVD-VIDEO
Select Channel to Add/Delete
Use the CH / buttons to tune in the channel
number you wish to add or delete.
Use the number buttons to move the channel direct-
ly. If you use the navigation
➐❷ button, the chan-
nel will be moved to the next memorized channel.
5
Select “Setup”
Using the ➐❷ buttons, move the selection bar to
“Setup” then press ENTER to select.
2
Select “Channel Set”
Using the ➐❷ buttons, move the selection bar to
“Channel Set,” then press ENTER to select.
3
Select “RF Output Channel”
Move the selection bar to “RF output Channel”,
then press right to change.
4
Change “RF Output CH”
Select channel 3 or 4 using the ➐❷☎ button.
Then press ENTER to change.
5
Change “TV Channel”
A message will appear on your TV. When the mes-
sage disappears, change your TV to channel 3 or 4
to match the RF output channel of the player.
6
Guide Channel Setup
Set these guide channels so you can use VCR Plus+ codes for
timer recording. Before starting the settings, prepare a chart
showing the channels, station names and guide channels.
Open “MENU”
With the DVD in stop mode, press the MENU
button.
1
Select “Setup”
Using the ➐❷ buttons, move the selection bar to
“Setup” then press ENTER to select.
2