Toshiba D-VR3SU - Manual (Page 13)

English - 25
S
ystem Setup
24 - English
C
onnections
S ystem Setup
On-Screen Menu
Navigation
The on-screen menus allow you to enable or disable vari-
ous functions on your DVD Recorder-VCR. Use the follow-
ing buttons to open and navigate through the on-screen
menus.
MENU Button
Press this button on the remote control while the
DVD or VCR is in Stop or Play mode to open the
on-screen MAIN MENU.
1
Up/Down and Left/Right
Use these buttons to move the selection bar
up/down and left/right to cycle through the
menu options.
2
Enter Button
Press this button on the remote control to confirm
any new settings.
3
Return Button
Press this button on the remote control to return to
the last MENU screen displayed or to exit the on-
screen MENU all together.
4
DVD-RAM(VR)
• On-Screen Menu Navigation . . . . . 25
• Auto Clock Set . . . . . . . . . . . . . . . 26
• Manual Clock Set . . . . . . . . . . . . . 27
• Channel Set . . . . . . . . . . . . . . . . . 28
• Setting Up the Language Features 29
• Setting Up the Audio Options . . . . 30
• Setting Up the Display (Video) Options . . . 31
• Setting Up the Parental Control . . . 32
• Auto Channel Memory . . . . . . . . . 33
• Channel Add/Delete . . . . . . . . . . . 34
• RF Out Channel . . . . . . . . . . . . . . 35
• Guide Channel Setup . . . . . . . . . . 35
• VCR Setting . . . . . . . . . . . . . . . . . 36
• Video Input . . . . . . . . . . . . . . . . . 37
• Front Display . . . . . . . . . . . . . . . . 38
To determine whether your television is compatible,
follow the instructions below.
1. Switch your television on.
2. Point the remote control towards the television.
3. Hold down the TV button and enter the two-figure code
corresponding to the brand of your television, by pressing
the appropriate numeric buttons.
Result: If your television is compatible with the remote con-
trol, it will switch off.
It is now programmed to operate with the remote
control.
You can then control the television using the following
buttons.
Brand Codes Brand Codes
TOSHIBA 01 SHARP NEW 08, 13
RCA/GE 02 SANYO 09
SONY 03 MAGNAVOX 10
MITSUBISHI 04 GOLDSTAR 11
JVC 05 SAMSUNG 12
HITACHI 06 ZENITH 14
PANASONIC 07, 15 PIONEER 16
Button Function
POWER Used to switch the television on and off.
INPUT SEL. Used to select an external source.
VOL + or - Used to adjust the volume of the television.
CH ( or ) Used to select the required channel.
TV MUTE Used to toggle the sound on and off.
If several codes are indicated for your television
brand, try each one in turn until you find one that
works.
Note
The various functions will not necessarily work on
all televisions. If you encounter problems, operate
the television by using the TV’s remote control.
Note
Setting the Remote Control
Your DVD Recorder-VCR remote control will work with
Toshiba televisions and compatible brands.
TV MUTE
100 + AUDIO
INPUT SEL.
SELECT
COPY
RETURN CLEAR
DVD
ON / STANDBY TV ON / STANDBTY
OPEN/CLOSE
VCR Plus+
VOL
F / ADV / SKIP
MARKER
CH / TRK
VCR TV
DISPLAY REC SPEED SUBTITLE TV / VCR
REC REC PAUSE
PIP TIME SLIP
VCR DVD