Toshiba D-VR3SU - Manual (Page 16)

English - 31
S
ystem Setup
30 - English
S
ystem Setup
Setting Up the
Display(Video) Options
This function allows you to setup the TV screen settings.
With the unit in Stop mode, press the MENU but-
ton on the remote.
You can’t use the Setup functions during playback. 1
Select Setup using ➐❷ buttons, then press the ❿
or ENTER button.
2
Select Video using ➐❷ buttons, then press the ❿
or ENTER button.
Video option menu will be displayed.
3
This function depends on disc type. It may not work for
some disc types.
Select the sub menu using ➐❷ buttons, then press
the ❿ or ENTER button.
4
Use the ➐❷ buttons to select the desired item.
Then press the RIGHT or ENTER button.
5
Press the RETURN or ➛ button to return to the
previous menu. Press the MENU button to exit the
menu.
Note
Display(Video) Options
TV Aspect
Depending on the type of television you have, you may
want to adjust the screen setting. (aspect ratio)
• 4:3 Letter Box : Select when you want to see the
total 16:9 ratio screen DVD supplies,
even though you have a TV with a
4:3 ratio screen. Black bars will
appear at the top and bottom of the
screen.
• 4:3 Pan - Scan : Select this for conventional size TV
when you want to see the central
portion of the 16:9 screen. (Extreme
left and right side of movie picture
will be cut off.)
• 16:9 Wide : You can view the full 16:9 picture on
your widescreen TV.
Black Level
Adjusts the brightness of the screen.
• 0 IRE : This is the standard NTSC reference
black level for consistent bright-
ness/contrast across all sources.
• 7.5 IRE : This will enhance the black level for
increased brightness/contrast when
viewing DVDs.
3D NR(Noise Reduction)
• On : Select to reduce noise from the screen
• Off : Normal
Note
Note
Note
Digital Output
Setting Up the Audio
Options
Use the ➐❷ buttons to select the desired item.
Then press the RIGHT or ENTER button.
1. PCM : Converts to PCM(2CH) 48kHz audio.
Select PCM when using the Analog
Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream
(5.1CH). Select Bitstream when using
the Digital Audio Output.
DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital out-
put only. Select DTS when connecting to
a DTS Decoder.
Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.
5
Press the RETURN or ➛ button to return to the
previous menu. Press the MENU button to exit the
menu.
Be sure to select the correct Digital Output or no
audio will be heard.
When DTS soundtrack is played, sound is not out-
put from Analog Audio Output.
If you set the player menu, disc menu, audio and subtitle
language in advance, they will come up automatically every
time you watch a movie.
With the unit in Stop mode, press the MENU but-
ton on the remote. 1
Select Setup using ➐❷☎ buttons, then press the ❿
or ENTER button.
2
Select Audio using ➐❷ buttons, then press the ❿
or ENTER button.
Audio setup menu will be displayed.
3
Use ➐❷ buttons to select the desired sub menu
and press the ENTER or ❿ button.
4
PCM
Bitstream