Topcom DESKMASTER 520 - Manual (Page 17)

17
Deskmaster
7.1.2 Broker
You have established a second call and you want to switch between both calls:
• 2nd call active, 1st call on hold.
• Press the flash key “R” followed by ”2“.
Connected to the 1st call.
• Press the Flash key “R” followed by ”2“.
Connected to the 2nd call.
7.1.3 Party Conference
You may connect yourself and both your calling partners to a 3 party conference:
• 2nd call active, 1st call on hold.
• Go to the menu function
conference.
• Switch to conference.
You can now speak to both
calling partners simultaneously.
OR
•
Press the Flash key “R” followed by ”3“.
The first Caller ID shown is always the call that was active prior to switching to conference.
During a conference, you can activate the following functions, using the menu keys (left and right
arrows):
Menu Function
back to call 1 • The conference situation will be released.
• You are again connected to the 1st call.
• The 2nd call is placed on hold.
back to call 2 • The conference situation will be released.
• You are again connected to the 2nd call.
• The 1st call is placed on hold.
disc. call 1 • The conference situation will be released.
• The connection with the 1st call will be broken.
• You will be connected to the 2nd call.
disc. call 2 • The conference situation will be released.
• The connection with the 2nd call will be broken.
• You wil be connected to the 1st call.
07231396410
connected
07118398261
connected
07231396410
connected
07231396410
connected
410 conference
07231396410 + 07118398 >
Conference
1st call 2nd call
HL_DM5201_GB.qxd 16-04-2003 13:24 Page 17