Topcom DESKMASTER 520 - Manual (Page 43)

43
Deskmaster
- The analog port can have its own MSN number, which should be programmed as described in the
sections before. If this MSN has not been set, the analog port will react to all incoming calls
(as the ISDN phone would).
Note : The analog extension is fed by the Deskmaster 520i. If you connect more extension in parallel, certain exten-
sions might not operate correctly. Therefore it is recommended to connect maximum 2 extensions to the analog port.
15.1 Configuration Overview
15.2 Transfer call from ISDN phone to analogue phone
An incoming or outgoing connected call on the ISDN phone can be transferred to the analogue port.
• During connection
• Select the menu entry Transfer to AB
The analogue phone will start ringing.
Lift the handset and you will be connected
with the external line.
15.3 Keypad commands on analogue port
To activate network features like call diversion (CFU, CFB, CFNR) from the analogue port, you can use
D-channel command (keypad). If you start dialling out from the analogue telephone and start with
* or #, the Deskmaster will automatically send it as D-channel commands (keypad). For example to
activate Call Forwarding Unconditional (CFU) from the analogue telephone, lift the handset and dial
* 21 * 123456 (Tel number) #.
Note : When you have programmed MSN number for the ab port, the analogue telephone will use this MSN
number to dial out and also the network features you activate or deactivate will be for this MSN number. If you
don’t have entered any MSN number for the ab port into the Deskmaster, the analogue phone will use MSN 1.
00325698855
connected
580 transfer to AB
Mo. 4 April 99 09: 00
ISDN
ISDN - Exchange
(or PABX)
NT1 S0-Bus
Voice / Data
Deskmaster AB
Headset
(optional)
V.24-port
Analog port
Windows PC
OR
OR
SO
@
1
2
3 4
5
6 7
8
9 *
0
1
+
-
R
ESC
OK
Deskmaster 520i
M1 M2 M3
1 2 3 4 5 6
9
#
7
* 0
8
Largo
HL_DM5201_GB.qxd 16-04-2003 13:25 Page 43