Topcom DESKMASTER 520 - Manual (Page 23)

23
Deskmaster
• Idle state, LED for the INFO key flashes.
• Scroll the list of programmed features.
• Scroll the list of programmed features.
• Select the displayed function.
• Switch function OFF.
The programmed feature “Call Waiting” will be disabled.
9.6 Direct Feature Access
As an experienced user of the ISDN phone, you may use the fast access to your frequently used
features by entering a 3 digit function code to directly access those features. This is not possible
during a connection. (See section “Menu/Function Overview” with a list of function codes.)
• In idle state: press function key.
• Enter function code; e.g. “140” for charges.
Note : The accessible function codes depend on the operation mode of the phone. Some functions may only be
valid in certain phone states, e.g. idle state.
• Display of the selected function.
9.6.1 Disable Function Code Display
The function codes can be displayed optionally. By default, this function is enabled.
• Press function key and select code 257.
(As an alternative step through the
menu “System Configuration”.)
• Display of the selected function.
• Display of function codes will
be switched OFF.
Mo. 21 Feb 99 17:26
Diversion (MSN 1) to
07118398262
Call Waiting active (ON)
Call Waiting (OFF)
Function :
Function : 140
Last Call
V : 1
D : 0
Function : 257
Numbers in menu (ON)
OFF
HL_DM5201_GB.qxd 16-04-2003 13:24 Page 23