Managing multiple handsets – Topcom BUTLER 2550 User Manual
Page 15
Topcom Butler 2550
15
ENGLISH
Setting the priority unit
1.
Enter the menu by pressing
/OK
2.
Select SETUP using the up
and down
keys
3.
Press OK
4.
Select priority using the up
and down
keys
5.
Press OK
6.
Select “SELECT” using the up
and down
keys
7.
Press OK
8.
Select "BASE" or "HANDSET X" using the up
and down
keys
9.
Press OK to validate
10. Choose the number of rings using the up
and down
keys
11. Press OK to validate
Activate / Deactivate the priority ring
1.
Enter the menu by pressing
/OK
2.
Select Setup using the up
and down
keys
3.
Press OK
4.
Select priority using the up
and down
keys
5.
Press OK
6.
Select "ON" or "OFF" using the up
and down
keys
7.
Press OK to validate
5.4 USING YOUR TELEPHONE WITH A PABX
It is possible to use your telephone with a PABX or a local telephone network.
Use of your telephone with a recent system does not require any special adjustment. With certain older systems, it is
necessary to insert a pause between dialling a prefix and dialling the rest of the number. Your telephone can inserts
this pause automatically during the numeration.
In order to do this you must enter the prefix and the pause length.
It is possible to choose 2 prefixes for 2 different PABX.
To remove the pause, delete the prefix in memory in the same way as you entered it.
Setting the prefix
1.
Enter the menu by pressing
/OK
2.
Select Setup using the up
and down
keys
3.
Press OK
4.
Select PABX using the up
and down
keys
5.
Press OK
6.
Select PBX1 or PBX2 using the up
and down
keys
7.
Press OK
8.
Enter the PIN code (default = 0000)
9.
Press OK to validate
10. Enter the PABX prefix
11. Press OK to validate
Setting the pause duration
1.
Enter the menu by pressing
/OK
2.
Select Setup using the up
and down
keys
3.
Press OK
4.
Select PABX using the up
and down
keys
5.
Press OK
6.
Select PAUSE using the up
and down
keys
7.
Press OK
8.
Select the PAUSE time using the up
and down
keys
9.
Press OK to validate
6. MANAGING MULTIPLE HANDSETS
6.1. SETTING UP AN ADDITIONAL HANDSET
You can subscribe new handsets on the base if these handsets support the DECT GAP protocol.
B2550_eur.book Page 15 Wednesday, October 23, 2002 3:35 PM