TRENDnet TEW-P1U1P - Manual (Page 18)

5. On this screen, select Custom, and click the Settings button.
Figure 10: Custom Screen
6. On the Port Settings screen:
• Choose LPR in the Protocol section
• Enter a Queue name (L1 for Parallel port, L2 for USB port)
• Ensure the LPR Byte Counting Enabled setting is Enabled.
• Click OK to confirm your changes, then click Next to continue.
Figure 11: Port Settings Screen
7. Follow the prompts to complete the Wizard.
8. Go back to Printer folder, click on the new created printer and right-click on the printer
icon and select Properties
Page 14