Connecting to the wireless print server, Configuration screens, Appletalk 40 – TRENDnet TEW-P1U1P User Manual
Page 44: Appletalk
Connecting to the Wireless Print Server
1. Start your Web Browser.
2. In
the
Address box, enter HTTP:// followed by the IP Address of the Wireless Print Server.
e.g.
http://192.168.0.21
3. You will then be prompted for the password. If no password has been set, just press
E
NTER
.
4. Use the menu bar on the top of the screen to move about. Remember to save each screen
before changing to a different screen.
Configuration Screens
Depending on your model and Firmware version, the Web-based interface may look different
to the images shown in this User's Manual.
The functions have not changed, and the description of each setting is correct. Only the
appearances are different.
AppleTalk
Figure 32: AppleTalk Screen
AppleTalk zone
This determines which Apple systems can gain access to this printer.
Printer Object
Type
These are text fields, used to describe the printer driver used for
each port. The Wireless Print Server is designed to work with
LaserWriter (or 100% compatible) printers.
Communication
Protocol
Sets whether the port uses ASCII or Binary Communication
Protocol.. The default is Binary.
Page 40