TRENDnet TEW-P1U1P - Manual (Page 26)

Capture Settings - Windows 2000/XP
1. Login as Administrator.
2. Open the command prompt window.
3. Enter the following command to capture data from LPT1 (parallel port 1)
net use lpt1 \\server_name\printer_name /persistent:yes
Where
\\server_name\ printer_name
is replaced with the actual path to your printer.
e.g.
net use lpt1 \\SC3000014\P1 /persistent:yes
4. Close the command prompt window.
To terminate this capture, use the following command at the command prompt:
net use lpt1 /delete
Page 22