Toshiba MA-1595-1 - Manual (Page 151)

5. READ (X) AND RESET (Z) REPORTS EO1-11152
5.2 General Notes On Report Takings
5-21
(3) Close Batch (with Debit)
A close batch command is sent to the EFT terminal.
Sales transaction of the day is ended and a batch file is sent to the host to make a settlement.
Mode Lock: Z
31 [#] 2 [AT/TL]
NOTES:
1. While the ECR is communicating with the EFT Terminal, “PROCESSING” is displayed.
When the communication is completed successfully, ”BATCH OPENED” is displayed.
2. When a response from the EFT terminal was not sent correctly, an error message is displayed.
When no response was sent from the EFT terminal within a specified time (standard: 10 minutes),
a timeout error occurs on the ECR and an error message “NO RESPONS” is displayed.
3. The result of the processing is printed on the receipt.
(4) Change Batch Number
This operation is performed if a finalization cannot be successfully done with a Close Batch operation.
Call the host company for confirmation, and change the Batch Number to the designated one.
Mode Lock: Z
32 [#] |Batch Number| [AT/TL]
Max. 4 digits (0 to 9999)
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-31-2003 SUN #3001
CLOSE BACH D
OK
XXXXXXXXXXXXXXXXXXXXXXXXXXXXX
1CL 9999 17:35TM
TEC STORE
1343 PEACH DRIVE
PHONE: 87-6437
Open 8:00am to 7:00pm
Closed: every Wednesday
08-31-2003 SUN #3001
CHANGE BATCH
ZZZ9
1CL 9999 17:35TM
The changed BATCH NUMBER will be printed.
In the case of an error, “NG” will be printed in place of “OK”.
In the case of an error, a response from the EFT will be printed, also.