Toshiba MA-1595-1 - Manual (Page 168)

6. PROGRAMMING OPERATIONS EO1-11152
6.6 PLU Table Programming (Submode 4)
6-15
DEPARTMENT TABLE PROGRAMMING CONTENTS (continued)
Address No. Description of Programming Contents
(1) NOTE: The “Major Group” and “Minor Group” here are merely namings for those two
grouping total memories. In the memory process, those two totals are independent
from the other and no logical check is made for a combination of the Major and Minor
group codes to be linked to each department. In other words, you may regard them
as “A” grouping and “B” grouping. See the examples below:
Major-Minor Grouping Method Example:
(In this case, you should check the logical linkage between the Major Groups and Minor
Groups.)
Major GP 01 Major GP 02
Minor
Minor Minor Minor Minor
GP 01 GP 02 GP 03 GP 04 GP 05
DP01 DP02 DP04 DP06 DP07 DP10 DP11 DP14 DP16
0101 0101 0102 0103 0103 0204 0204 0205 0205
Linked Group Code in setting
“A” Grouping and “B” Grouping Method Example:
(In this case, you may think that each department data are processed into max. 2 different
types of groupings.)
A-GP A-GP A-GP B-GP B-GP B-GP
01 02 03 01 02 03
DP01 DP02 DP04 DP06 DP07 DP10 DP11 DP14 DP16 DP17
0100 0100 0201 0301 0300 0302 0002 0003 0003 0002
Linked Group Code in setting
2 Department Name (Descriptor)
Enter a maximum of 16 regular-sized or 8 double-sized characters by referring Section 6.2
Character Entries, then end with the [ST] key.
When no name is programmed for a department, the following will be the auto-program name
(default value) for printing:
D P xx
Department Code 01 to 99
Double-sized characters
3 Preset Price
• For a preset department (preset-price department), enter a maximum of 6-digit price, and
depress the [#] key.
1 to 999999 (result: 0.01 to 9999.99)
When the option “Preset Point for one decimal digit allowed” is selected, the decimal digit
can be entered after entering a maximum of 5 integer digits and [.] key.
1 to 99999 (result: 0.01 to 999.99)
or
0.1 to 99999.9 (result: 0.001 to 999.999)
• A zero-price (0.00) may be preset by entering 0 in the above operation.
• When no numerics are entered and the [#] key is simply depressed, the department will be
an open department (open-price department).
• For a department handling gasoline, set the preset price per gallon
(max. 999.999 = 999 dollars 99.9 cents can be preset).
Be certain to enter the amount less than cent when programming the preset price of
gasoline.
ex.) To set the preset price of $1.25, enter the numeric value of 1250 and depress the [#]
key.