Teac DVW-D110H - Manual (Page 20)

Erase
12 TEAC 1x10 DVD Duplicator User’s Manual
Erase
The Erase function erases the data from /RW media. The default setting performs
a Quick Erase when you press the RUN button.
You can also press and hold the RUN button for three (3) seconds to perform a
Full Erase . The Full Erase requires more time than the Quick Erase .
Load
The factory-installed hard disk drive was partitioned and formatted at the factory.
Each partition is approximately 9GB in size.
The Load function enables you to transfer data from the DVD-ROM or DVD
Writer drive to the current partition on the hard disk drive.
If you are loading various sources to the hard disk drive, change the Partition
Name to specify a new partition after the Load function is completed. This will
prevent you from overwriting data that has already been loaded into the previous
partition.