Teac DVW-D110H - Manual (Page 22)

CD Writing Speed
14 TEAC 1x10 DVD Duplicator User’s Manual
CD Writing Speed
The CD Writing Speed function controls the speed at which the source drive writes
to a CD-R disc.
The default setting is MX (maximum) write speed.
❑ RUN: Modify parameter.
❑ SET: Save and quit.
DVD Reading Speed
The DVD Reading Speed function controls the speed at which the source drive
reads a DVD disc.
The default setting is MX (maximum) read speed.
The MID is set according to the highest speed supported by the blank disc.
❑ RUN: Modify parameter.
❑ SET: Save and quit.
DVD Writing Speed
The DVD Writing Speed function controls the speed at which the source drive
writes to a DVD disc.
The default setting is MX (maximum) write speed.
The MID is set according to the highest speed supported by the blank disc.
❑ RUN: Modify parameter.
❑ SET: Save and quit.
Advanced Setup
The Advanced Setup function lets you access Advanced mode.
❑ To enter
Advanced mode, press the RUN button when Advanced Setup is
displayed on the LCD.
❑ To exit the
Advanced mode, press and hold the SET button until you hear a
beep.