Toshiba Strata DKT2404-DECT - Manual (Page 24)

Installation
Step 5: Connect and Apply Power
14
Strata CIX DKT2404-DECT User Guide 04/09
Step 5: Connect and Apply Power
Base Unit
1. Plug the AC adapter cord into the AC
adapter input jack on the base unit (shown
at right).
2. Plug the AC adapter into a standard
120VAC wall outlet.
3. Check to see that the power LED is lit.
Charging Unit
1. Plug the AC adapter cord into the input
jack on the charging unit.
2. Plug the AC adapter into a standard
120VAC wall outlet.
3. Check to see that the handset LED is lit.
Note You can place the handset in the charging unit with or without the belt clip
attached.
Important!
• Use only the supplied AC adapter.
• If the handset LED on the charging unit and/or the battery LED on the base unit
do not light, return everything to your Authorized Dealer.