Operation & setup 3, Operation with the strata cix, Chapter 3 – operation & setup – Toshiba Strata DKT2404-DECT User Manual
Page 31: Power up power down, Operation & setup
Strata CIX DKT2404-DECT User Guide 04/09
21
Operation & Setup
3
Power Up
ä
Handset - When the battery is put into the handset it starts operation. Upon power-
up the handset searches for RF communication from the base station.
ä
Base Station - The base station starts operation when the AC adapter is plugged in
(there is no On/Off switch).
Power Down
ä
Handset - If the handset loses battery or the battery level is less than a threshold
set in the handset software, it goes to power-down mode and no talk function is
supported.
ä
Base Station - If the base station loses power no talk function is supported.
Operation with the Strata CIX
The operation described below is an example of using the DKT2404-DECT with a
Strata CIX telephone system and may differ from your particular installation (details
depend on your Strata CIX configuration).