Toshiba IK-HR2D - Manual (Page 15)

15
7 MODE SETTING BY THE ON SCREEN DISPLAY
7 1 Using the Menus
When the unit is powered on, the normal screen showing only the video signal appears. Change the
output to each screen (video signal output, color bar screen, index menu, and menus) by using the
[DISP], [PAGE], [MENU UP], [MENU DOWN], [DATA UP], and [DATA DOWN] buttons.
* A menu is selected when pushing the [PAGE] button after moving the “䊲” on the screen by the
[MENU UP], [MENU DOWN] button while the Index menu is displayed.
* When Index menu is displayed, the DVI output mode appears in the upper right of the screen.
Note: The displayed mode is not a USB output mode.
Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The
contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is
unnecessary to set the values again when using the unit next time. When the setting is performed, select
the menu of the item to be set.
Note:
The characters displayed while operating the on screen display menu (OSD) or auto white balance
(AWB) are output from the camera control unit as an image superimposed on the picture. Once the
picture is recorded, you cannot separate characters from the picture nor remove only the displayed
characters from the recorded signal. Be careful of operating the OSD and AWB while taking picture.
POWER ON
Video signal output
DISP
PAGE
PAGE
1.SHUTTER 2.GAIN 3.WHT BAL 4.PROCESS 5.MATRIX 6.OPTION
Color bar screen
Menus
Index menu
DISP DISP
PAGE PAGE PAGE PAGE
PAGE PAGE
MANUAL
OFF
N O AWB
OFF ATW
MANUAL
GAMMA
ON
GAMMA
OFF
AUTO
MANUAL
SS
PAGE
DISP