Toshiba IK-HR2D User Manual
Page 21
21
(c) Changing color temperature setting
䐖
Move the “䊲” to C.TEMP by pressing [MENU UP], [MENU DOWN] buttons.
䐗
Select either 3200K or 5600K by pressing [DATA UP], [DATA DOWN] buttons.
(a) Changing R PAINT
䐖
Move the “䊲” to R PAINT by pressing [MENU UP], [MENU DOWN] buttons.
䐗
Select the desired value of red paint by pressing [DATA UP], [DATA DOWN] buttons.
(b) Changing B PAINT
䐖
Move the “䊲” to B PAINT by pressing [MENU UP], [MENU DOWN] buttons.
䐗
Select the desired value of blue paint by pressing [DATA UP], [DATA DOWN] buttons.
(d) Confirming the contents of the zone area selected by AWB
䐖
Move the “䊲” to AREA DISP by pressing [MENU UP], [MENU DOWN] buttons.
䐗
Select the desired area by pressing [DATA UP], [DATA DOWN] buttons.
-10 0 10
[DATA UP] ࠉRed is increased.
Red is decreased. ࠉ [DATA DOWN]
-10 0 10
[DATA UP] ࠉBlue is increased.
Blue is decreased. ࠉ [DATA DOWN]
The available picture area is divided into 64 rectangles. The user can choose one of 5 presets.
The shaded rectangles represents the area/pattern where the sampling is taken from.
PRESET A
PRESET B
PRESET D
PRESET C
PRESET E