Toshiba IK-HR2D - Manual (Page 24)

24
䟺 䟺䟺 䟺 4䟻䟻䟻䟻 PROCESS
Gamma correction ON, OFF
Gamma correction level setting -10 to 10 -- 4 PROCESS -- <FILE A>
GAMMA ON/OFF
GAMMA
Detail gain setting -7 to 7
DTL GAIN
Detail boost frequency HIGH, NORMAL, LOW
M PED
Master pedestal setting -128 to 127 DTL B.FREQ
ON
0
0
0
HIGH
䟺 䟺䟺 䟺 4䠀 䠀 䠀 䠀 1䟻䟻䟻䟻 Changing gamma correction ON/OFF
䐖 Move the “䊲” to GAMMA ON/OFF by pressing [MENU UP], [MENU DOWN] buttons.
䐗 Select either ON or OFF by pressing [DATA UP], [DATA DOWN] buttons.
Gamma correction ON, OFF
-- 4 PROCESS -- <FILE A>
Detail gain setting -7 to 7
GAMMA ON/OFF
DTL GAIN
M PED
Detail boost frequency HIGH, NORMAL, LOW DTL B.FREQ
OFF
0
0
HIGH
Master pedestal setting -128 to 127
Menu when GAMMA OFF is selected.
䟺 䟺䟺 䟺 4䠀 䠀 䠀 䠀 2䟻䟻䟻䟻 Changing gamma correction level
䐖 Move the “䊲” to GAMMA by pressing [MENU UP], [MENU DOWN] buttons.
䐗 Select the desired value of gamma correction level by pressing [DATA UP], [DATA DOWN] buttons.
* When OFF is selected in GAMMA ON/OFF selection line, the gamma correction level cannot
be changed.
Move up and down
by pressing
MENU UP,DOWN
Select the desired
value by pressing
DATA UP,DOWN
Move up and down
by pressing
MENU UP,DOWN
Select the desired
value by pressing
DATA UP,DOWN
-10 0 10
[DATA UP]
[DATA DOWN]
Correction amount
becomes larger.
Correction amount
becomes smaller.