Transition Networks MIL-SW8T1GPA - Manual (Page 20)

18
remote management that include telnet, SNMP, and Web browse the switch
only when the port of VLAN group ID is equal to the Management VLAN ID
Name: the name of the switch
Password: Web GUI login password. The default password is root
Inactivity Timeout: The web connection timeout time
And then, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
Port Configuration
Configure the port of status.
Link: Display the current connection speed(1000FDX, 100FDX, 100HDX,
10FDX, 10HDX, Down)
Mode: Set the Auto Speed, 1000 Full mode of the port
Flows control: Set Flow Control function is “enable” or “disable” in Full Duplex
mode
MaxFrame(1518 ~ 9600): The Maximum Frame Size that in Bytes fro frames
received on the port. Tagged frames are allowed to be 4 Bytes longer than the
Maximum Frame Size
And then, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying