Transition Networks MIL-SW8T1GPA - Manual (Page 30)

28
RSTP Status interface
802.1X Configuration
802.1x is an IEEE authentication specification that allows a client to connect to a
wireless access point or wired switch but prevents the client from gaining access to
the Internet until it provides credentials, like a user name and password that are
verified by a separate server.
Mode: To disable or enable 802.1x protocol
RADIUS IP: Set the Radius Server IP address
RADIUS UDP Port: Set the UDP destination port for authentication requests to
the specified Radius Server
RADIUS Secret: Set an encryption key for use during authentication sessions
with the specified radius server. This key must match the encryption key used
on the Radius Server
Admin State: Select the state of port
Force Authorized: The specified port is required to be held in the
unauthorized state
Force Unauthorized: The specified port is required to be held in the
authorized state
Auto: The specified port is set to the authorized or unauthorized state in
accordance with the outcome of an authentication exchange between the
Supplicant and the authentication server
Re-authenticate: Restart authentication process for the port
Force Reinitialize: Restart a complete authentication process for the port
Statistics: Click to view each port statistic
Re-authenticate All: Restart authentication process for all the port
Force reinitialize All: Restart a complete authentication process for the port
And then, click Apply to apply the configuration