Transition Networks MIL-SW8T1GPA - Manual (Page 25)

23
Grouping the members of Trunk. Normal means the port is not trunk port
And then, click Apply to apply the configuration
Or, click Refresh to reset the configuration before applying
Port Trunk interface
LACP Setting
The Link Aggregation Control Protocol (LACP) provides a standardized means for
exchanging information between Partner Systems on a link to allow their Link
Aggregation Control instances to reach agreement on the identity of the Link
Aggregation Group to which the link belongs, move the link to that Link Aggregation
Group, and enable its transmission and reception functions in an orderly manner.
Link aggregation lets user group up to eight consecutive ports into a single
dedicated connection. This feature can expand bandwidth to a device on the
network. LACP operation requires full-duplex mode, more detail information
refers to IEEE 802.3ad.
Protocol Enable: To enable the LACP protocol of the port
Key Value: The LACP key determines which ports potentially can aggregate
together
And then, click Apply to apply the configuration