Topcom MIRA 200 - Manual (Page 7)

Mira 200 Mira 200
13
button . The display will start blinking. When you want to continue the tele-
phone conversation, press the mute button again.
8.6. HANG-UP BUTTON
When you have made a mistake while dialling a telephone number, you can press
the hang-up button
and dial the number again. By pressing the hang-up
button it is also possible to make several phone calls after each other with-
out disconnecting the radiolink. After pressing the hang-up button “BREAK”
appears on the display.
8.7. REDIAL
When you have dialled a telephone number but did not receive an answer, you
can call this number again afterwards. The last number dialed is saved. When
you wish to dial the number again, first press the line button
(the last num-
ber dialed appears on the display) and then, after hearing the dial tone, press the
redial button
. The number is now automatically redialed.
If you wish to redial the number immediately without breaking the connection
with the base station, first press the hang-up
button and then the redial
button .
8.8. TRANSMISSION (FLASH) R
With the flash button R - also called flash, recall or R button - you can transfer a
line to another telephone on your telephone exchange. The R button has a flash
function, this means that a short line interruption is being generated.
Consult the operating guide of your telephone exchange for a correct use of this
function.
This button is sometimes also used for services offered on your public telephone
line.
12
3. Press the numbers “28 ” and the button.
4. Press the line button .
8.2.2. BACK TO PULSE DIALLING
1. Press the line button and wait for the dial tone.
2. Press the set button (“SET” appears on the display).
3. Press the numbers “28 ” and the # button.
4. Press the line button
.
8.3. MAKING A TELEPHONE CALL
Make sure the correct dialling system has been set (pulse or tone dialling) by
making an outgoing call. Press the line button
and wait for the dial tone. The
radio connection indicator on the base station lights when the radio connec-
tion has been established. Now dial the desired telephone number.
Press the line button after ending the telephone conversation, the Mira 200
returns to standby and “ON” appears on the display. In case you want to make
another phone call, press the hang-up button
instead of the line button and
dial the desired telephone number.
8.4. RECEIVING A TELEPHONE CALL
When you are being called, first the base station will ring and after a short period
of time also the handset. Press the line button
. When you hear a beep, you
can start the conversation. Press the line button again to end the conversa-
tion.
8.5. MUTE FUNCTION
If you wish to talk to a third person without your correspondent hearing this con-
versation, you can temporarily turn off the microphone. Simply press the mute