Toshiba P100/P105 - Manual (Page 54)

54 Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
For more information on memory options, check the
accessories information that came with your computer, or
visit
accessories.toshiba.com .
Before adding external devices or memory, Toshiba
recommends setting up your software. See
“Setting up your
software” on page 44 .
Installing a memory module
Additional memory modules can be installed in the memory
module slots on the base of the computer. You will need a
standard Phillips No. 1 screwdriver for this procedure.
If you use the computer for a long time, the memory module
will become hot. If this happens, let the module cool to room
temperature before you replace it.
To avoid damaging the computer’s screws, use a standard
Phillips No. 1 screwdriver that is in good condition.
Installing a memory module with the computer’s power on may
damage the computer, the module, or both.
The computer has two memory module slots. You can install
one or two memory modules.
Before you install or remove a memory module, turn off the
computer using the Start menu. If you install or remove a
memory module while the computer is in Standby or
Hibernation mode, data will be lost.
NOTE