Toshiba P100/P105 - Manual (Page 68)

68 Getting Started
Using external display devices
5.375 x 8.375 ver 2.3
9 Close the Control Panel window.
The Fn + F9 shortcut can be used to disable or enable the Dual
Mode Pad (see
“Disabling or enabling the TouchPad or Dual
Mode Pad” on page 232 ).
Using external display devices
Your computer comes with a built-in LCD display, but you
can also connect an external display device to the available
video ports:
❖ An external monitor or projector via the RGB (monitor)
port.
❖ A standard television, projector, or VCR/DVD recorder/
player via the S-video Out port.
❖ A projector or a monitor via the DVI video port (DVI
video port is available on some models).
DVI stands for Digital Visual Interface, and is a standard for
connecting computers to digital monitors.
Before connecting a television, video projector, monitor or
other external display device, configure your computer for
the type of device you are connecting. To do this, refer to the
documentation for your operating system and the device.
Connecting an external monitor or projector
You can easily attach an external monitor or projector to your
computer if you need a larger screen. To do this:
1 Connect the monitor’s video cable to the RGB (monitor) port
on the back of the computer.
2 Connect the device’s power cable to a live electrical
outlet.
NOTE
NOTE