Toshiba P100/P105 - Manual (Page 56)

56 Getting Started
Adding memory (optional)
5.375 x 8.375 ver 2.3
6 Using a standard Phillips No. 1 screwdriver, unscrew the
screw that secures the memory module slot cover.
Sample unscrewing the memory module slot cover
7 Remove the memory slot cover.
8 Place the screw and the cover in a safe place so that you
can retrieve them later.
Static electricity can damage the memory module. Before you
handle the module, touch a grounded metal surface to
discharge any static electricity you may have built up.
To avoid damaging the memory module, be careful not to
touch its pin connector on the side you insert into the
computer.
9 Remove the new memory module from its antistatic
packaging.
Avoid touching the connectors on the memory module or on
the computer. Grease or dust on the connectors may cause
memory access problems.
Front of computer