Transition Networks STACKMASTER TR SMHB-TR-16 - Manual (Page 27)

3 3.. IIN NSST TA ALLLLA AT TIIO ON N
3-9 USER’S GUIDE
Bringing up Configuration Software.
NOTE: Refer to 1.6 for a detailed description of the StackMaster™TR 16-
Port Configuration Software Display available at the attached terminal.
To bring up the StackMaster™TR 16-Port configuration software, at the
attached terminal command line, enter:
^D (“control D”)
The StackMaster™TR 16-Port Configuration Main Menu comes up.
At the StackMaster™TR 16-Port Configuration Main Menu, to select any of
the listed configuration menus, type and enter the name of the selected
menu:
MAIN> <selected menu>
AT ANY AND ALL CONFIGURATION MENUS:
To modify a parameter, use the command syntax:
ANY MENU> <parameter> = <value>
Alternatively, select a parameter available at a different menu by using the
command syntax:
ANY MENU > <any menu> <parameter> = <value>
To reference acceptable values for a parameter, use the help command
syntax:
ANY MENU> <parameter> = <?>
To bring up a reference list of line-editing commands, type and enter:
ANY MENU > keys
To exit, enter the command:
ANY MENU> quit
StackMaster™TR Configuration Main Menu
main serial
ip bootp
snmp misc
MAIN >
Select a parameter [main ==> root menu OR ? ==> help]