Specifications, Sleep operation – Teac HD-1 User Manual

Page 18

Advertising
background image

1

1

When the HD-1 is OFF or while listening to your iPod or the

radio, press the

SLEEP button to enter sleep mode.

2

You can adjust the sleep timer from 120, 90, 75, 60, 45, 30,

15 minutes by pressing the SLEEP button again.

• By the "SLEEP" mode, the"

" icon is blinking on the

display.

• Pressing the

SLEEP button to “00” will turn off the unit.

• When the display changes back to show the real time,

pressing the

SLEEP button once will show the sleep time

remaining. Pressing it again will change sleep time to the
next lowest increment.

• HD-1 has independent volume setting for sleep mode so

you can adjust the sleeping volume without affecting the
alarm volume. Turn the

VOLUME knob (or press Volume+

and Volume- Button on the remote control) to adjust sleep
volume. The sleep volume will remain at that level the next
time you enter sleep mode until controls are changed.

• To stop SLEEP mode at any time, press the

STANDBY/ON

button.

• The unit will automatically turn off after the selected time.

Sleep mode has a Gentle Sleep feature which gradually
lowers the volume.

Specifications

TUNER Section

Frequency Range . . . . FM: 87.5 MHz to 107.9 MHz

( 200 kHz step )

AM: 520 kHz to 1710 kHz

( 10 kHz step )

GENERAL

Total Output Power . . . . . . . . . . . . . . . . . . . 6 W (L+R)
Power Requirement . . . . . . . . . . . . . . . AC 120 V, 60 Hz
Dimension (W x H x D) . . . . . . . . (375 x 172 x 244 ) mm
Weight (Net) . . . . . . . . . . . . . . . . . . . . . . . . . . . 3.7 kg

Standard Accessories

Remote control (RC-1219) x 1
Battery for Remote control Unit (CR2032) x 1
Dock adapter x 4
(adapter “iPod classic (160G) + iPhone 2G/3G” premounted)
Video cable
Stereo mini plug cable
AM loop antenna
FM antenna
Owner's Manual
Warranty Card

Connectivity

30-pin male connector for iPod / iPhone

3.5mm stereo headphone jack
3.5mm aux. in jack
3.5mm Video out jack

FM antenna jack ( F-Type connector )
AM antenna connector ( 2-Pin type )

• Design and specifications are subject to change without

notice.

• Weight and dimensions are approximate.

• Illustrations may differ slightly from production models.

Sleep Operation

SLEEP

Advertising