Topcom BUTLER 4056C - Manual (Page 17)

Topcom Butler 4056/4056C 17
Topcom Butler 4056/4056C
ENGLIS
H
4.15 Switch the handset on/off
4.15.1 Switch the handset off
The handset is turned on.
•
Press the Programming key .
• Press the Up or Down key repeatedly until ‘POWER OFF?’ appears on the display.
• Press the Programming key . The telephone turns itself off. You cannot dial any more
numbers, nor receive any calls.
Note : If you would like to leave the menu without turning off the handset, press the
Delete/Mute key
.
4.15.2 Switch the handset on
The handset is turned off.
•
Press the Programming key . The telephone turns itself on.
4.16 Setting the ring volume level on the handset
You can change the ring volume of an incoming call. You have 10 levels. You can set the
ring volume of internal and external calls separately so you can hear a difference.
If you select level ‘0’, the symbol
appears on the display and you no longer hear the phone
ring when an external call is received (you still hear it ring for internal calls).
Level ‘9’ is the highest level. The telephone is set to level ‘5’ by default.
4.16.1 Setting the ring volume for external calls (0-9)
•
Press the Programming key .
• Press the Up or Down key repeatedly until ‘RING SEL’ appears on the display.
• Press the Programming key .
• ‘EXTERNAL‘ appears on the display.
• Press the Programming key .
• Press the Up or Down key repeatedly until ‘VOLUME’ appears on the display.
• Press the Programming key .
• The current volume level used appears on the display.
• Enter a number between 0 and 9 to select the desired ringer volume. Use the number
keypad to do this.
• Press the Programming key to confirm your selection.
4.16.2 Setting the ringer volume for internal calls (1-9)
•
Press the Programming key .
• Press the Up or Down key repeatedly until ‘RING SEL’ appears on the display.
• Press the Programming key .
• ‘EXTERNAL‘ appears on the display.
• Press the Up or Down key repeatedly until ‘INTERNAL’ appears on the display.
• Press the Programming key .
• Press the Up or Down key repeatedly until ‘VOLUME’ appears on the display.
• Press the Programming key .
• The current volume level appears on the display.