Topcom BUTLER 4056C User Manual
Page 23
Topcom Butler 4056/4056C
23
Topcom Butler 4056/4056C
ENGLIS
H
4.27 Barring outgoing calls
You can program the handsets to bar calls to certain telephone numbers so that for instance
‘00’ international numbers cannot be called. Up to 5 numbers (of max. 5 digits) can be barred.
To do this, do the following:
•
Press the Programming key
.
•
Press the Up or Down key
repeatedly until ‘SETTING’ appears on the display.
•
Press the Programming key
.
•
Press the Up or Down key
repeatedly until ‘BARRING’ appears on the display.
•
Press the Programming key
.
•
‘PIN’ appears on the display.
•
Enter your PIN code
•
Press the Programming key
.
•
‘BAR NUM ’ appears on the display. You are in memory “1. _ _ _ _ _”.
•
Press the Up or Down key
to select one of the 5 memories.
•
Enter the number (max. 5 digits) to be barred, e.g. 01486.
•
Press the Programming key
.
•
‘HS _ _ _ _ _’ (= number on the handset (1-5)) ‘01486’ (= the barred numbers) appear
on the display.
•
Enter the numbers of the handsets from which the barred numbers cannot be called.
•
e.g. Press the number key 2, 3 and 5. On the display, this will appear: HS _2 3_5 01486
These handsets can no longer dial numbers beginning with ‘01486’.
•
Press the Programming key
to confirm your selection.
Repeat the same procedure described above if you would like to bar other numbers (max. 5)!
4.28 Direct Call
By setting a Direct Call number, the phone will automatically take the line and dial out this
number. This function is useful to use the phone as a emergency phone.
4.28.1 To program the Direct Call number
•
Press the Programming key
•
Press the Up or Down key
until ‘DIRECT’ appears on the display
•
Press the Programming key
•
If necessary, delete the existing number by pressing the Delete-key a few times
•
Enter the direct number
•
Press the Programming key
4.28.2 Turn the Direct Call function ON/OFF
To turn it ON:
•
Press the Programming key
•
Press the Up or Down key
until ‘DIRECT’ appears on the display
•
Press the mute-key
for 2s
•
‘DIRECT ON’ appears on the display
To turn if OFF:
•
Quick press the Programming key
twice