6voice mail indicator, 7base telephone operation – Topcom BUTLER 4056C User Manual
Page 27
Topcom Butler 4056/4056C
27
Topcom Butler 4056/4056C
ENGLIS
H
5.5
Deleting numbers from the Call List
5.5.1 Deleting one number
•
Press the Up key
to go to the Call List.
•
Press the Up key
to find the call you would like to delete.
•
Once this call appears on the display, press the Delete key
.
•
‘DELETE?’ appears on the display.
•
Press the Programming key
to confirm your selection or the Delete key
to cancel.
•
The call is deleted and the next call appears on the display.
5.5.2 Delete all numbers
•
Press the Up key
to go to the Call List.
•
Keep the Delete key
pressed until ‘DELETE ALL’ appears on the display.
•
Press the Programming key
to confirm your selection or the Delete key
to cancel.
•
All calls are deleted.
6
Voice mail indicator
This function only works if you have the voice mail or phone mail service and if the network
sends this indication along with the caller ID (CLIP) information!
When you receive a new message in your voice mail system, the
icon will appear on the
display. Once you have listened to your messages, the
icon will disappear.
7
Base telephone operation
You can also make a telephone call by using the base station handsfree speakerphone.
7.1
Making a call
•
Press the Handsfree base dialling key to take the line
•
Press the numeric keys on the base to form a telephone number
•
Press again the Handsfree base dialling key to end the telephone conversation
7.2
Adjusting the speaker volume
Press the ‘+’ or ‘-’ key
during base handsfree conversation to adjust the speaker volume.
If the speaker volume is too loud there is the possibility that the speaker starts to oscillate
(flute tone). To avoid this, please lower the speaker volume.
7.3
Transfer a call from base to handset
During base handsfree conversation you can transfer the call to any registered handset by
pressing the paging key
. The line indicator LED
will start to blink.
•
You can take over the line by any registered handset when pressing the line-key .
•
Or press the paging key again if you don’t want to transfer the call