Toshiba GA-1120 - Manual (Page 129)

5
5-31 Exiting Setup
Allow Courier Substitution —Specify whether to substitute Courier for unavailable
fonts. When you choose Off, jobs requiring fonts unavailable on the GA-1120 hard
disk generate a PostScript error and do not print. This setting does not apply to PDF
files; font substitution occurs automatically for PDF files.
Print to PS Error —Specify whether the GA-1120 should print the available portion of
a print job when it encounters a PostScript error. In general, this option should be No.
• When you choose No, the printing of the entire job is canceled when a PostScript
error occurs, but the processed portion of the job and the PostScript error
information are stored on the GA-1120. You can view the job and the error
information from the job management tools.
• When you choose Yes, the portion of the job processed before the error occurred is
printed.
Exiting Setup
When you have finished specifying Setup options, click OK and close the Setup dialog
box. You are notified that the GA-1120 must be restarted for the new settings to take
effect. You can restart now or later. If Command WorkStation is running, the
connection to the GA-1120 is lost and you must log on again when the server has
restarted.
After you have completed Setup and restarted the GA-1120 for the first time, install
the user software for printing on remote workstations, as described in the
User Software
Installation Guide . To confirm the network connection and your Setup, print a test job
from a remote workstation.