Toro 12 - Manual (Page 62)

56
1. Turn the Function dial to the blank position, located
between Flow and Reports.
MAINTENANCE TIMEOUT
Skip
2. Turn the Lower Line dial to Edit.
3. Turn the Upper Line dial one click.
4. Turn the Lower Line dial to ON.
5. Turn the Upper Line dial to highlight Time.
6. Turn the Lower Line dial to set timeout duration (0.5–8.0 hours).
Using the Maintenance Timeout Function
The MaintenanceTimeout feature enables a time period ranging
from 0.5 to 8.0 hours to be set, then selectedas required. During
the timeout period, the leak detection function is disabled and
the normally-closed master valve is energized. A typical use of
the Maintenance Timout function would be to facilitate quick-
coupler irrigation.