Topfield High Defninition Digital Satellite Receiver HV7700 HSCI - Manual (Page 14)

8 Setup
the power consumption of the digital receiver, refer to
Table
2.1 .
• The wall outlet should be near the equipment. Do not
run an extention lead to the unit.
• Do not expose the digital receiver to any moisture. The
digital receiver is designed for use indoors only. Use dry
cloth when cleaning the digital receiver.
• Place the digital receiver on a firm and level surface.
• Do not place the digital receiver close to heat emitting
units or in direct sunlight, as this will impair cooling.
Do not lay any objects such as magazines on the digi-
tal receiver. When placed in a cabinet, make sure there
is a minimum space of 10 centimetres around it. For
the physical specification of the digital receiver, refer to
Table
2.2 .
• Protect the power cord from being walked on or
pinched. If wires are exposed or cord is damaged, do
not use the digital receiver and get cord replaced.
• Never open the digital receiver casing under any cir-
cumstances. Warranty will be void.
• Refer all servicing to a qualified service technician.
Table 2.1: Power specification
Input voltage 90 to 250 V AC, 50/60 Hz
Power consumption 37 W at maximum in operation
8 W in standby
Table 2.2: Physical specification
Size 430 Ч 60 Ч 265 mm
Weight 2.9 kg
Operating temperature 0 to 45 °C
Storage relative humidity 5 to 95 %