Topfield High Defninition Digital Satellite Receiver HV7700 HSCI - Manual (Page 18)

12 Setup
To use the SCART connector
For best results with a standard television
set, you should use a SCART cable, plugging
one end into the TV socket on the digital re-
ceiver and the other end into a free SCART
socket on your television.
Some televisions have inputs via Com-
ponent or S-Video connectors rather than
SCART.
If you have such a television, use an appropriate conversion
cable to link the TV socket on the digital receiver to the match-
ing socket on your television.
If you connect with a standard SCART cable, you do not have
to make audio connections because the SCART connector can
output stereo audio. But if you use a conversion cable, such as
SCART-to-Component, you have to make audio connections.
NOTE
You cannot view high definition video with the SCART con-
nector.
To use the component video connector
You will need to obtain a component video
cable (RCA cable) to use the component
video connector. Plug one end of the ca-
bles into the Y (green), Pb (blue) and Pr (red)
sockets on the digital receiver, and the other
end into the matching sockets on your tele-
vision.