Topfield High Defninition Digital Satellite Receiver HV7700 HSCI User Manual
Page 36
30
Service Search
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Auto.
To search every service of a transponder, perform the follow-
ing steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Manual.
3. Choose your desired transponder at the Frequency op-
tion or input it with the numeric buttons.
4. Input the symbol rate of your desired transponder to the
Symbol Rate
option with the numeric buttons.
5. Set the Polarization option to the polarization of your de-
sired transponder.
6. Set the Modulation option to the modulation method of
your desired transponder. If your desired transponder
has high definition broadcasts, you should set this op-
tion to DVB-S2 QPSK or DVB-S2 8PSK. Then the FEC
option and the Pilot option will become enabled. You
also should set these options correctly.
NOTE
You can get transponder information from a satellite magazine
or web site such as
or
To search one service of a transponder, perform the following
steps:
1. Choose your desired satellite at the Satellite Name op-
tion.
2. Set the Search Mode option to Advanced.