Topfield High Defninition Digital Satellite Receiver HV7700 HSCI User Manual
Page 26
20
Preference Settings
Select the System Setting >
Time Setting
menu. You should
see a screen like the left figure.
You can make the local time to
be automatically set by using
Greenwich Mean Time (GMT).
To use Greenwich mean time,
take the following steps:
1. Set the Mode option to Auto; then the Time Offset option
becomes enabled.
2. Set the Time Offset option to the time difference between
your time zone and GMT referring to Table
3. To get Greenwich mean time, set the GMT Collection op-
tion to one among the following:
Normal
from all transponders
CAS TP
from transponders of pay services
User Select
from transponders specified by you
If you set it to User Select, then the Satellite and Trans-
ponder
options become enabled. Select your desired
satellite and transponders at those options. With the
above settings, the digital receiver will scan all trans-
ponders specified one by one until to get the Greenwich
mean time.
4. Make sure that your local time is correctly displayed on
the Local Time option.
To set the local time yourself, set the Mode option to Man-
ual
and enter your local time into the Local Time option with
the numeric buttons. The time format is day/month/year 24-
hour:minute.