Toshiba Printer DP-1810 User Manual
Page 24
Advertising
1 PREPARATION
22 Description of Each Component
7. USB terminal (4-pin)
With this terminal, the equipment can be connected to your PC using a commercially avail-
able USB cable.
y
Use a USB2.0 Hi-Speed certified cable: USB cable supporting the USB2.0 Hi-Speed
mode (480 Mbps of transfer speed) certified by the USB Implementers Forum.
y
Connect the equipment with a PC directly by the USB cable. When it is connected with a
PC via a USB hub, the equipment may not be recognized.
8. Receiving tray
9. Scanning area
The data of originals transported from the Automatic Document Feeder (optional, MR-2020)
are scanned here.
10. Original scale
Use this to check the size of an original placed on the original glass.
11. Platen sheet
Advertising