Toshiba Printer DP-1810 - Manual (Page 45)

Placing Originals 43
Using Automatic Document Feeder (optional)
When a stack of originals are placed on the Automatic Document Feeder (optional), the originals
are automatically scanned one by one. The following types of originals are available:
y Some media types may not be used.
y The maximum number of sheets acceptable varies depending on the media types of the
originals.
y ST size originals must be placed in a landscape direction.
y Sizes which the Automatic Document Feeder (optional) can detect automatically are LD, LG,
LT, LT-R, COMP and ST-R.
Precautions for Automatic Document Feeder (optional)
Do not use the following types of original since such types may cause a paper jam or damage to
the equipment:
y Extremely wrinkled, folded or curled ones
y Ones with carbon paper
y Taped, pasted or cut-out ones
y Clipped or stapled ones
y Ones with holes or tears
y Damp ones
y Overhead transparencies or tracing paper
y Coating paper (e.g. coated with wax)
y Ones with many holes punched (e.g. loose leaf paper)
The following types of originals are usable but need extra care:
y Ones which cannot be made to slide with the fingers or whose surface is specially treated
(they may not be able to be separated from each other at feeding)
y Folded or curled ones (should be smoothed out before being used)
When black streaks appear on the copied image
If the scanning area or the guide area is dirty, image problems such as black streaks on the cop-
ied image may occur. Weekly cleaning of these areas is recommended.
P.96 “Daily Inspection”
Media types Maximum size
Maximum number of
sheets acceptable
Paper weight
Plain paper 11.69" x 17.01" 100 sheets
(or stack height 0.62") 13.3 - 33.8 lb.