Toshiba Printer DP-1810 - Manual (Page 42)

2 HOW TO MAKE COPIES
40 Placing Originals
Placing Originals
Acceptable originals
Booklets, three-dimensional objects and some types of special media can be placed on the orig-
inal glass, as well as plain paper. When the Automatic Document Feeder (optional) is used, a
stack of plain paper originals can be automatically scanned one by one.
*1 The automatic size detection function is not enabled for A/B format.
*2 “Special media types” refers to special paper which is not acceptable for the Automatic Document
Feeder (optional), such as overhead transparencies or tracing paper.
*3 Do not place heavy objects (9 lb. or more) and do not press on it with force.
*4 Its paper weight should be between 13.3 lb. and 33.8 lb.
*5 Some media types may not be used.
*6 ST size originals must be placed in a landscape direction.
Maximum number of originals scanned in one go
Up to 250 original sheets can be scanned at one time. When the number of sheets to be
scanned exceeds 250 or the built-in memory in the equipment becomes full during the scanning
of the copy job, scanning stops, the [FUNCTION CLEAR] lamp blinks and the [START] lamp is
lit.
To copy the data scanned so far, press the [START] button. To delete them, press the [FUNC-
TION CLEAR] button.
When non-sort copying or sort copying for one set is performed, only the [FUNCTION CLEAR]
lamp blinks. Thus only data deletion is possible. After doing this, perform copying again with the
original divided.
Setting position
Type of origi-
nals
Maximum
size
Acceptable sizes for auto-
matic size detection
*1
Remarks
Original glass Plain paper
Special media
types
*2
Booklets
3-dimensional
objects
11.69" x 17.01" Not acceptable for automatic
size detection
*3
Automatic
Document Feeder
(optional) Plain paper LD, LG, LT, LT-R, COMP, ST-R
of standard sizes *4, *5, *6