Control panel, P.24 “control panel – Toshiba Printer DP-1810 User Manual
Page 26
1 PREPARATION
24 Description of Each Component
Control panel
1. [SORT] button/lamp
Use this to use the sorting function.
P.61 “Copying in Same Page Order as Originals - Sort Copying -”
2. Media type setting button/lamps
Use this button to switch the media type of paper placed on the bypass tray.
3. [DATA] lamp
The lamp blinks when print data are being received from a PC connected to the equipment.
4. Message lamps
Each of five lamps shows you the current status of the equipment.
For the meaning of each lamp and countermeasure of each status, see the following page:
P.72 “When Message Lamp is Lit/Blinking”
5. Zoom buttons/lamp
Use them to set reproduction ratio. The lamp above the
button is lit when the repro-
duction ratio is 100%.
For how to zoom in or out copy image, see the following page:
P.56 “Zooming In/Out Copy Image”
6. LED display
Use this to display the number of copies set. The reproduction ratio appears here when the
copy qty. / zoom display selecting button (7) is pressed.
7. Copy qty. / zoom display selecting button/lamp
The display of (6) is switched between copy quantity and reproduction ratio each time you
press this button. The lamp beside the “%” mark is lit when the reproduction ratio appears.
1
2
3
4
8
9
10
12
13
15
14
17
18
19
20
21
11
6
5
7
16