Tektronix 560 User Manual
Page 107
Printing Basics
4
User Manual
4-43
Selecting the Multi-Purpose Feeder
Select the Multi-Purpose Feeder in one of these two ways:
■
Driver selection
1.
In the
dialog box (under
Tray Selection
or
Paper Source
,
depending on the driver), select one of the following:
■
Multi-Purpose Tray
(automatically selects the media type
defined in the front panel).
■
Multi-Purpose Manual Feed
(see Step 2).
2.
If you selected
Multi-Purpose Manual Feed
, select the media
type or
Paper 2nd Side
in the
MP Manual Feed Media
pull-down menu (in the
Options
or
TekColor Options
dialog
box, depending on the driver).
The printer waits 8 minutes for you to load the media and
confirm your selection in the front panel before it cancels
the job.
■
Front panel selection
1.
Enter the front panel menu (press
Menu
) and navigate (press
the right or left arrow button) to the
Printer Defaults
menu.
2.
Select
Media Type
in the
Multi-Purpose Feeder
menu.
3.
In the
Media Type
menu, select the desired media or
Paper 2nd Side
for double-sided printing.
The front panel setting is overridden by the driver selection
for
Multi-Purpose Manual Feed
.
4.
Press the
button to return to the
Multi-Purpose Feeder
menu.
5.
Select
Media Size
in the
Multi-Purpose Feeder
menu.
6.
In the
Media Size
menu, select the desired size media.
Exit