Tektronix 560 - Manual (Page 151)

Caring for Your Printer 6
User Manual 6-3
When to replace components
When the printer’s front panel indicates that a component needs to be replaced, make sure that you
have replacements on hand. The printer may continue to print until the component is completely
used up; for the toner and Fuser Roll, the printer stops until you replace them. The Imaging Unit and
Fuser continue to print.
Printer component Front panel message Average life* Order number
T ONER CARTRIDGES
<color> low
Change the color toner soon.
Stopped:
Replace:<color>
Change the color toner now .
10,000 pages
(CMY)**
Black 016-1536-00
Cyan 016-1537-00
Magenta 016-1538-00
Yellow 016-1539-00 12,000 pages
(Black)**
I MAGING U NIT
Imaging Unit:replace
Change the Imaging Unit soon.
Imaging Unit expired
Change the Imaging Unit now .
57,000 images
or
14,250 color pages
016-1523-00
60,000 images
or
15,000 color pages
F USER
Fuser:replace
Change the Fuser soon.
Fuser expired
Change the Fuser now .
27,000 pages 110 Volt 016-1534-00
220 Volt 016-1535-00
30,000 pages
F USER R OLL
Fuser Roll:replace
Change the Fuser Roll soon.
Stopped:
Fuser Roll:replace
Change the Fuser Roll now .
15,000 pages
016-1556-00
15,500 pages
T RANSFER K IT
Transfer Kit:replace
Change the Transfer Kit now .
60,000 pages
016-1533-00
* These figures are based on an average of 5% coverage of the printable area for any one color using laser paper. The frequency
of replacement will vary, depending on the complexity of the prints, the percentage of coverage, and the type of media.
Transparencies, glossy coated paper, and other specialty media will result in shortened consumable life.
** The starter cartridges that are shipped with the printer have an average life of approximately 3,000 pages, based on an
average of 5% coverage.
9698-51
9698-52
9698-53
9698-54
9698-55